Ballparking Fatigue Costs

Fatigue is the odd stat out in GURPS. The basic attributes are relatively straightforward, and  most players and GMs grasp the purpose of hit points. Fatigue can easily become a throwaway stat, used only to fuel exotic abilities like powers or magic or to give the character a little extra oomph in combat. That’s unfortunate. Fatigue is an easy way to challenge characters by making their decisions take a toll, without requiring anything beyond the GURPS Lite rules. This post will present a rules-light way to ballpark fatigue costs so GMs can incorporate fatigue into their campaigns.

Fatigue Basics

Fatigue rules in Basic Set
Fatigue rules in Basic Set

As a quick recap: every GURPS character has a maximum number of fatigue points (FP), which defaults to their HT level. Characters can spend FP to do physical tasks, to use extra effort in a situation, or to cast spells; some special abilities also require FP in order to function. Just like hit points, spending FP comes at a cost: when a character is below 1/3 of their maximum FP, they move slower and can carry less. When characters go below 0 FP, they start to take damage from additional FP loss and are at risk for collapsing from exhaustion. Fatigue points can be recovered in a variety of ways, most commonly by resting.

Fatigue is a natural fit for gritty or realistic campaigns; in fact, the After the End series expands the fatigue rules to convey the grim reality of survival in a post-apocalyptic world. But it can also be used to great effect in cinematic campaigns, superhero dramas, or action adventures by showing how the characters need to push themselves to the limit in order to best the challenges they face.

The rules for fatigue are detail-driven, both in the Basic Set‘s presentation as well as the more abbreviated listing in GURPS Lite. Sometimes you can roll against a skill to avoid spending fatigue points (FP). Other times, you have to spend FP when doing an action regardless of how skilled the character is. Sometimes fatigue costs are modified based on the PC’s encumbrance; other times they are not. The intervals for spending FP vary in unpredictable ways: it costs 1 FP to dig in loose soil for an hour, but 1 FP per minute for paced running (unless you succeed at a Running or HT roll).

Rough Fatigue Costs

This post aims to make it easier for GMs to include fatigue in their games by helping them ballpark fatigue costs. Instead of being rules-dependent and spending time looking up exactly how many FP it costs to hold your breath underwater for a minute, GMs can use their judgment to impose fatigue costs on the PCs and keep the game rolling.

Strenuous Effort: 1 FP

When a PC performs a physically demanding task, that task usually costs 1 FP. The examples below are all represented as 1 FP cost activities:

  • Fighting a battle
  • Hiking
  • Swimming
  • Digging
  • Missing a meal
  • Becoming dehydrated
  • Not getting enough sleep (staying up too long or waking up early)
  • Exposure to extreme temperatures
  • Using extra effort in combat
  • Using extra effort for a physical task that exceeds your normal limits
  • Casting a known Sorcery spell
  • Casting simple magic spells like Awaken, Deflect Energy, Light, or Minor Healing

There is a lot of variety within this category, which is good for the rules light approach because it makes 1 FP cost a fair default. Again, the rules vary on many of the details, such as how often someone must pay the fatigue cost or whether the player can roll against a skill in order to avoid the fatigue cost.

It’s helpful to remember the context: the default human has 10 FP, so the standard is that someone could do these things 10 times without rest before being at risk of passing out due to exhaustion. That baseline can help the GM estimate the frequency for these costs; you might impose the cold exposure cost every minute for being in cold water, but only once per hour for being underdressed in cool weather.

If your game assumes that players have skills for lots of physical tasks, like Running, Swimming, or Survival, then it makes sense to allow the players to roll in order to avoid spending fatigue. But, that’s a play style choice, and there’s nothing wrong with a game that decides to ignore those skills and just charge the FP, or to have the players roll against HT instead of the specific skill.

Especially in a rules-light game, it’s important to remember that managing player expectations is more important than being precise according to the laws of physics. As long as players know that cold exposure is exhausting their characters and they have time to react to that information before the PCs keel over, the exact rate for imposing fatigue costs is not critical. Roll if it’s appropriate, charge the first FP, tell the players how long they have before they will lose the next FP, and let the players decide how to respond.

Encumbrance: 1 FP per level

Many of the physical tasks that cost fatigue points also have a leveled effect based on how encumbered the PC is. For each level of encumbrance, the character needs to spend an additional FP beyond what is normally required for the task. For instance, a character fighting a battle with medium (level 2) encumbrance would pay 1 FP for the battle and an additional 2 FP for being encumbered, for a total of 3 FP.

The GM should charge the encumbrance penalty when it makes sense. Running, swimming, and lifting heavy objects are situations in which encumbrance would logically make the task more exhausting. By contrast, holding your breath underwater, missing a meal, or being exposed to extreme temperatures are probably not affected by encumbrance levels.

Draining Effort: 2 or More FP

Compared to the variety of conditions that cost a single fatigue point, there aren’t many canonical examples of actions that cost multiple fatigue points in a single act. High acceleration, thermal shock, poison, and the drop-off effect from stimulants can all cost multiple FP at once. These examples all represent situations that genuinely drain the PC; they need to be cautious about additional exposure in order to avoid damage and unconsciousness.

The major source of multiple FP actions is magic. In the Basic Set magic system, about 50 of the spells fall into this range. In Sorcery, improvised magic or casting known spells at higher levels requires multiple FP. Ritual Path Magic quirks can include fatigue costs, averaging just under 2 FP for a single quirk up to almost 6 FP for a triple quirk.

In general, acts that require multiple fatigue points per use are explicitly intended to be limiting. If a character has to pay that cost multiple times, they will quickly run into the 1/3 FP threshold that imposes severe restrictions on the character’s abilities. As a result, GMs should save multi-FP costs for situations that are intended to make an unmistakable impact.

All-Out Effort: 5 FP and Higher

Once a character is paying 5 FP for a single situation, there’s very little room for error. Almost any additional fatigue costs would push an average character below the 1/3 threshold, and attempting the all-out stress a second time would put the character at risk of passing out.

The only mundane situations that would cost that much fatigue are engaging in strenuous effort while encumbered at the highest level (extra-heavy) or failing a roll for an extreme situation like thermal shock by a massive margin.

For a character to spend 5 FP or more at a time, the player really needs to plan ahead. The character probably need to invest in additional FP (or energy reserves, for mages). Otherwise, the character needs a way to gather or recover that energy: the Fit advantage, power stones, high skill levels to gather ambient energy, or the like. It’s simply not sustainable for characters to spend that much effort without advance planning.

As a result, the GM and players should plan together for any situations that might require all-out effort levels of fatigue. Magic users or characters with superpowers that require high fatigue expenditures should recognize those choices during the character creation process, so they should be equipped to handle those situations. Likewise, if the GM anticipates an all-out fatigue expenditure event as part of the campaign arc (e.g., if the characters will need to survive on an ice planet), then the players should be prepared for that during character creation as well so they can build their characters appropriately.

Fatigue the Rules Light Way

Using these guidelines, it’s relatively easy to assign reasonable FP costs in-game:

  • Most cases of extraordinary physical exertion, challenging environmental conditions, or invoking powers cost 1 FP
  • When performing physically taxing tasks, encumbrance costs additional FP per level of encumbrance
  • Acts or conditions that cost multiple FP should represent intentionally severe situations
  • The GM should be very cautious about assigning a fatigue cost above 2 FP
  • If fatigue costs above 5 FP are possible, the players should know in advance so they can make sure their characters are equipped to handle the challenge